PLANET IP30 8-PORT GIGABIT WALL-MOUNT SWITCH 4-PORT POE

KEY FEATURES PHYSICAL PORT * 8-Port 10/100/1000BASE-T Gigabit RJ-45 copper with 4-Port IEEE 802.3at / af PoE Injector (Port-1 to Port-4) POWER OVER ETHERNET * Complies with IEEE 802.3at High Power over Ethernet end-span PSE * Backward compliant with IEEE 802.3af Power over Ethernet end-span PSE * Up to 4 ports of IEEE 802.3af / 802.3at devices powered * Supports PoE Power up to 30.8 watts for each PoE port * Auto detects powered device (PD) * Circuit protection prevents power interference between ports * Remote power feeding up to 100 meters LAYER 2 FEATURES * High performance Store and Forward architecture; runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth * IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation * 9K Jumbo frame supports in 1000Mbps duplex mode * Automatic address learning and address aging INDUSTRIAL CASE / INSTALLATION * Compact size, wall-mounted, magnetic wall mount and DIN-rail design * IP30 metal chassis * Supports -10 to 60 degrees C operating temperature * Supports EFT 6000VDC protection for power line * Supports ESD 6000VDC Ethernet protection * LED indicators for real-time PoE usage * 48V~56V DC input range for booting with polarity reverse protect function SPECIFICATIONS HARDWARE SPECIFICATIONS * Network Connector: * 8-Port RJ-45 for 10/100/1000BASE-T * PoE Inject Port: * 4-Port with 802.3af / 802.3at PoE injector function (Port-1 to Port-4) * Switch Architecture: * Store and forward * MAC Address Table: * 8K MAC address table with auto learning function * Data Buffer: * 1Mbit * Switch Fabric: * 16Gbps / non-blocking * Switch Throughput: * 11.9Mpps@64Bytes * Jumbo Frame: * 9Kbytes * Flow Control: * IEEE 802.3x pause frame for full duplex * Back pressure for half duplex * LED Indicators: * Power LED: Power (Green) * PoE Power Usage LED: 30W, 60W, 90W, 120W (Green) * PoE Port(Port-1 to Port-4): * PoE-in-Use (Orange) * LNK/ACT (Green) * 10/100/1000BASE-TX Port (Port-5 to Port-8): * 1000 (Green) * LNK/ACT (Green) * Connector: * Removable 3-pin terminal block for power input: * Pin 1/2 for DC Power * Pin 3 for earth ground * DC power jack with 2.0mm central pole * Power Requirements: * 48~56V DC, 3A (max.) * Power Consumption: * 140 watts / 478BTU * ESD Protection: * 6KV DC * EFT Protection: * 6KV DC * Enclosure: * IP30 metal * Dimensions (W x D x H): * 148 x 134 x 25 mm * Weight : * 510g * Installation: * Wall mount, magnetic wall mount and DIN-rail kit POWER OVER ETHERNET * PoE Standard: * IEEE 802.3af / 802.3at Power over Ethernet PSE * PoE Power Supply Type: * End-span * PoE Power Output : * IEEE 802.3af Standard - Per port 48V~56V DC (depending on the power supply), max. 30 watts * IEEE 802.3at Standard - Per port 50V~56V DC (depending on the power supply), max. 30 watts * Power Pin Assignment: * 1/2(+), 3/6(-) * * PoE Power Budget: * 120 watts (depends on power input) * Max. Number of Class 2 PD: * 4 * Max. Number of Class 3 PD: * 4 * Max. Number of Class 4 PD: * 4 * The actual power output may vary on the external power system with maximum 120 watts PoE budget for the switch. STANDARD CONFORMANCE * Standard Compliance: * IEEE 802.3: Ethernet * IEEE 802.3u: Fast Ethernet * IEEE 802.3ab: Gigabit Ethernet * IEEE 802.3x: Flow Control * IEEE 802.3af: Power over Ethernet * IEEE 802.3at: High Power over Ethernet * Regulation Compliance: * FCC Part 15 Class A, CE * Stability Testing: * IEC 60068-2-32 (Free fall) * IEC 60068-2-27 (Shock) * IEC 60068-2-6 (Vibration) ENVIRONMENT * Operating: * Temperature: -10 ~ 60 degrees C * Relative Humidity: 5 ~ 95% (non-condensing) * Storage: * Temperature: -20 ~ 70 degrees C * Relative Humidity: 5 ~ 95% (non-condensing) ACCESSORY * Standard Accessories: * Users manual x1 * Magnetic kit x 1 * DIN-rail kit x 1 * Screws x 4 * Dust cap x 8